NVIDIA GeForce RTX 5080 power connector: what does it need?
The NVIDIA GeForce RTX 5080 needs 1× 16-pin 12V-2x6 (12VHPWR-compatible) from the power supply. At about 360 W board power, here is what to know before you plug it in.
Recommendations are planning estimates, not electrical or purchasing advice. The hardware figures behind them are vendor-published; your exact board-partner model and build can still differ.
Power connector
1× 16-pin 12V-2x6 (12VHPWR-compatible)
Reference power input.
GPU board power
360 W
Vendor TGP/TBP — a conservative ceiling, not typical gaming draw.
PSU minimum (typical build)
750 W
Assumes a 125 W-class CPU + standard accessories.
PSU comfortable (typical build)
850 W
Standard headroom for spikes and future room.
ATX 3.x advice
An ATX 3.1 (or ATX 3.0) power supply with a native 12V-2x6 / 16-pin cable is strongly recommended for this card. It avoids adapters entirely and is specified for modern GPU power excursions.
Safety notes
- Seat the 16-pin connector fully — NVIDIA's instruction is to ensure the plug is fully inserted and seated flush against the receptacle. Partially seated 16-pin connectors are the known cause of melted plugs. Route the cable so nothing forces it sideways at the plug.
- Use the native PSU cable or the adapter supplied with the card. Never chain third-party adapters or extensions on a 16-pin connection.
- Never mix modular cables between different PSU brands or models. The PSU-side pinout is not standardized — a mismatched cable can destroy hardware.
- Do not exceed a cable's rated load with splitters or adapters, and replace any cable with damaged or discolored connectors.
- Before buying, confirm the connector layout and PSU guidance on the official pages of both your exact card model and your PSU — board partners change designs between variants.
Sizing a supply for a full build? See the NVIDIA GeForce RTX 5080 PSU recommendation → or open the full PSU Calculator →
Source: NVIDIA official specification page (AI-assisted verification, 2026-07-08). Last updated: 2026-07-08.
Frequently asked questions
What power connector does the NVIDIA GeForce RTX 5080 use?
The NVIDIA GeForce RTX 5080 uses 1× 16-pin 12V-2x6 (12VHPWR-compatible). Always confirm the exact layout on your specific board-partner model.
Do I need an ATX 3.1 power supply for the NVIDIA GeForce RTX 5080?
An ATX 3.1 (or ATX 3.0) PSU with a native 12V-2x6 / 16-pin cable is strongly recommended for the NVIDIA GeForce RTX 5080. It avoids adapters entirely and is specified for modern GPU power excursions.
What size PSU pairs with the NVIDIA GeForce RTX 5080?
For a typical companion system we estimate a 750 W minimum and 850 W for comfort. Use the PSU Calculator for your exact CPU and parts.