What PSU for a NVIDIA GeForce RTX 5060 Ti and Ryzen 5 7600?
Pairing a NVIDIA GeForce RTX 5060 Ti (180 W board power) with a Ryzen 5 7600 (88 W peak) gives a system load of about 385 W. Both figures are verified against the manufacturers’ own specifications — the sources are linked below.
Recommendations are planning estimates, not electrical or purchasing advice. The hardware figures behind them are vendor-published; your exact board-partner model and build can still differ.
Recommended PSU
550 W
Leaves the supply at about 70% load under gaming.
Minimum
450 W
Smallest quality tier we would pair with this build.
System load
385 W
180 W GPU + 88 W CPU + 117 W rest of build.
GPU power connector
1× PCIe 8-pin
Plus the board’s EPS 12V cable for the CPU.
Where the power goes
The NVIDIA GeForce RTX 5060 Ti is still the largest single draw at 180 W, but only 47% of the 385 W total — in a build this modest the processor (88 W) and the rest of the system together account for more than the card does. The remaining 117 W covers the board, memory, one SSD, three fans and a USB allowance.
GPU 47% · CPU 23% · rest of build 30%
Why 550 W
This is a close call. With standard headroom the requirement lands only about 7% above a 450 W unit, so a high-quality 450 W supply is not absurd — it would simply run closer to its limit, at roughly 86% load under gaming. We still recommend 550 W: the margin buys quieter fan behaviour and room for the brief peaks a card of this class produces.
Graphics-card draw is not flat — brief peaks above the rated board power are normal, and a supply running close to its limit can trip on one. We do not publish a peak figure for the NVIDIA GeForce RTX 5060 Ti because the manufacturer does not publish one. At 180 W a quality unit of the recommended wattage copes without drama; an ATX 3.x supply is a reasonable buy but not a requirement for this build.
Here the manufacturer is more cautious than we are: it recommends 600 W for the NVIDIA GeForce RTX 5060 Ti, while our maths with the Ryzen 5 7600 gives 550 W — 50 W lower. Vendor numbers are deliberately padded to cover weak supplies and heavier CPUs than this one. Treat 600 W as the safe retail answer and 550 W as what this specific build supports with a quality unit.
Cabling this build
The NVIDIA GeForce RTX 5060 Ti takes 1× PCIe 8-pin, so cabling is simple: one lead from the supply, no splitters or adapters needed at 180 W. On top of that the board needs its EPS 12V CPU cable — one 8-pin is enough for the Ryzen 5 7600 at 88 W, though many boards expose a second socket you can leave empty.
Different case, more drives, or an AIO? Open the PSU Calculator with both parts pre-selected →
Figures above assume an ATX board, 2 RAM sticks, 1 SSD, 3 fans and a USB allowance, at the standard headroom profile.
Frequently asked questions
What PSU do you need for a NVIDIA GeForce RTX 5060 Ti and Ryzen 5 7600?
We recommend a quality 550 W power supply. The pairing draws about 385 W under load — 180 W for the card, 88 W for the CPU and 117 W for the rest of a typical build — and 450 W is the smallest tier we would pair with it.
How much power does a NVIDIA GeForce RTX 5060 Ti and Ryzen 5 7600 build use?
About 385 W under a combined gaming load, which is roughly 70% of the 550 W supply we recommend. That is a conservative figure built from vendor-published ceilings, so day-to-day draw is usually lower.
Is 600 W enough for a NVIDIA GeForce RTX 5060 Ti and Ryzen 5 7600?
Yes — comfortably. 600 W is the card maker's padded figure; this build only needs 550 W by our maths, so a 600 W unit leaves plenty of margin.